Monday, April 1, 2013

Revit Technology Conference Info

This is an echo of my earlier post, which was quickly overshadowed by news about Revit 2014 features, just to give it a little more attention.


If you read this blog (regularly) then I think/hope that RTC is no surprise to you. I'm writing this as a reminder to those who already know about it as well as to introduce them to anyone who hasn't already heard about them. After all May and RTC AUS isn't far away now...

These are the events in the order that they occur this year:

RTC Australasia - May 16-18, 2013 - Auckland, NZ
RTC North America - July 11-13, 2013 - Vancouver, Canada
RTC Europe - September 27-28, 2013 - Delft, Holland



Each event gives you an opportunity to listen, learn, talk and mingle with many of the best and brightest people that our planet has to offer, seriously!

I attended my first RTC in 2006 in Australia, where it all started (in 2005). I've been a fan ever since and even became a committee member to help start the first RTC in North America in 2011. It isn't any single thing that made me a fan. It was the whole of the experience.

For example, I knew that every person I saw around me was like me, fascinated by Revit, just Revit then and now by what it has expanded into. I knew that no matter who I listened to, talked with or saw in a hallway that I'd see them again...in a session, in a few minutes or during a break or during dinner and drinks. The value of the social side of the event can't be overstated. People have cultivated great friendships, formed at each event, and these last and prove mutually satisfying for years to come. I can vouch for this personally.

If you struggle with getting your firm to support sending you, or if you are the firm, or if you are trying to justify sending your staff consider just the classes alone. If you or someone in your firm was charged with putting together a class of equal quality, compared with any you'll find at RTC, you can reasonably expect a 10-20 hour commitment. That's time spent preparing themselves, making sure they've covered every angle of Revit knowledge they need, then organizing it all, preparing to share it with other staff and finally actually sharing it with them. It might take longer if it is the first time they've had to do something like this, or they might not be knowledgeable enough yet to tackle it all themselves. If this same person attends RTC and returns home not only with the material from the dozens of sessions they attend but access to all the material for each and every class offered at RTC you'll have a wealth of material for FAR less cash outlay than devoting them to developing the same material in-house.

It isn't just the classes either. It's the interaction, the setting, the focus, the passion and excitement expressed by others and witnessed by everyone. You can't help but feel reinvigorated. You'll recharge your batteries so to speak. When you leave RTC you leave ready, ready for anything and eager to take it all back to the office. It's just a shame that you can't bring your whole office along to experience it for themselves...well you can...just not many offices will dare to. There are a few firms that do send as many as 10-15 staff as they see it as their annual training for key people. Do your best to attend the nearest conference, you and your firm won't regret it!

P.S. If you represent a Local User Group focused on Revit I'd like to help you get the word out to your members. Get in touch with me so I can pass along information that you can use to make it easier to talk about it at your next meeting.

Saturday, March 30, 2013

What is Revit and BIM Resource

Alex Gore and his firm F9 Productions have created, as part of their company website, a resource for people that are just getting started with Revit and BIM or those who are still trying to decide what to do.

The site offers these items of interest:

  • A brief description of important modeling concepts
  • A PDF example of a complete Construction Documentation set
  • The Revit file of the above mentioned PDF
  • A 2012 Revit Residential Template to start your own creations
  • Links to tutorials for further help

A skeptic might read this and regard it as purely a marketing move. Alex's primary motive is to share the wealth with the community so to speak. For example a frequent question or concern people have is being able to see a completed set of documents. This is based on their fear, uncertainty or doubt that another software application, that is so intrinsically tied to how they make money, will truly be able to do what they need to do. So at the very least being able to examine their sample project and set may be useful, and if it is then the rest is "gravy". Have a look, see if you find something useful.

Friday, March 29, 2013

3D Printing and Revit STL Files

I recently got an email from a fellow Revit user asking if Revit 2014 changed anything for creating STL files, specifically if we could define inches as the base unit. I haven't had the opportunity to print anything to a 3D printer via a vendor myself yet so I'm clueless.

He shared with me his current frustration which apparently has to do with a fairly automated process that his vendors offer. Apparently it is as simple as: Submit your STL file online and get your automated quote in return. It works great as long as the submitted STL file uses the correct units, which is apparently "inches". If you don't cooperate with the system you end up having to call each vendor and it takes a lot more time than necessary.

He was specifically writing about the STL Exporter for Revit from Autodesk Labs. It exports to the units "Feet" and there is no way to alter that presumption. I've asked about it with a couple friends at Autodesk and it is on their radar so hopefully they can provide an option, in the future, for defining the units of the file output.

Since I have no wisdom to offer him and I know that at least a few readers have experience with this process I'm curious what alternatives he could consider. Can some other application that can edit STL files let him change the units? Perhaps the vendors could make this easier for customers and provide a pricing routine that asks for STL units? Is it more complicated than it seems? Comments are welcome!

Thursday, March 28, 2013

Revit 2014 Properties Palette Tabs

If you use Revit MEP you know how little screen space you can end up with if you open up the Properties Palette, Project Browser, System Browser and Reconcile Hosting dialogs at the same time. You can shrink them down pretty small but then they don't function very well. Sure you can close and open them as needed or put them on a second monitor too.

Revit 2014 offers another option, nest them on the Properties Palette and provide tabs for each so you can switch back and forth.


Jury is still out on this for me. I set it up and used it this way for quite awhile but kept forgetting where and which tab was active. One recurring comment was to have the focus or active tab switch to properties when elements are selected but I'm not sure if that worked its way into the final production release.

It is a little tricky at first to get them hosted on the palette, easy once you know how. Just click on the dialog title bar, drag it either to the title bar on the Properties Palette or over the tab(s) at the bottom of the palette. Either way you'll get a ghost of the overlay and a new tab will appear. Don't let go if you don't see the new tab appear, means it isn't going to work.

Love the subtle stuff!

Wednesday, March 27, 2013

Revit 2014 Selection Features

There are plenty of subtle things that routinely trip people up while they work in Revit. One such trip hazard is that linked files tend to overwhelm a view and are much too easy to select and inadvertently drag out of position. It is one reason people seem to recoil at using Press and Drag. In Revit 2014 a small collection of toggle buttons have been added to the Status Bar, next to the Filter and Element Count features.


The first button, starting at the left, is the option called Select Links. It is either on or off and allows us to control the selection of linked files. This should help alleviate some of the workarounds that have been practiced to avoid messing with a link, such as: Pinning, individual worksets and using Design Options.

The second button is Select Underlay Elements and this will prevent interacting with any elements that are visible because the view has another level assigned as an underlay. The selection window options (crossing and enclosing) have always been blind to underlay information and even elements above or below a view's primary range, and now picking elements individually can too.

If you don't like being able to interact with elements that you've pinned then the third button, Select Pinned Elements is your new friend. It will make it a little harder to delete pinned elements, assuming we turn the option off.

For years we have had to remind others and even ourselves that Revit is fairly blind when it comes to the faces of elements. Try to select a wall, that doesn't have a pattern on its surface, by placing the cursor somewhere on its face and Revit is oblivious. The new fourth button, Select Elements by Face changes all that. We'll be able to decide when and if faces are the easier way to select elements. We've spent years reminding people to select things at edges or boundaries of elements. Now we'll have the option but I suspect we'll still get to remind them of the options and how to change the setting.

The fifth button, Drag Elements on Selection is the renamed Press and Drag feature. Same as it ever was, just with a slightly more obvious name, one that explains its action and result.

The Modify button on the Ribbon now has a new drop down list that provides check boxes for each of these new options so we have a "front and side door" as usual,


Here's to the subtle stuff!

Addendum: As Aaron mentions in his comment, these settings can be captured in the .ini file which means something that you can control during deployment, if that's your particular concern.

Tuesday, March 26, 2013

More Detail on Revit 2014 Features

Autodesk's WikiHelp has been updated for 2014 features now too, including installation and deployment info (Revit Server too).

Check it out!

Revit 2014 - Connector by Radius or Diameter

Prior to Revit 2014 we could only create dimensions for the radius of arc and circles and connectors. With 2013's release they added a diameter dimension tool which makes it easier to constrain geometry in the family editor. Round connectors also only could be defined as a radius before. Now in 2014 this subtle parameter gives us the option to choose which makes more sense, radius or diameter.


Love the subtle stuff!